Ceilings and Walls
Click through to Luna & Valk
Materials Safety Data Sheet
ALULOC ALUMINIUM CEILING GRID MATERIALS
MATERIALS
Products manufactured by Luna & Valk Group Pty Ltd are extruded aluminium alloy 6063 temper T5 as per AS1866-1986, which is classified as a non-hazardous material.
PRODUCTION PROCESSES
A water based soluble lubricant is used to assist with the production process. These soluble lubricants are not considered hazardous when used as recommended by the manufacturer and are approved by WorkSafe Australia.
HANDLING AND STORAGE
Products are supplied in pack quantities and should be handles in accordance with the recommendations contained in AS 1470. Where mechanical lifting or moving equipment is required, trained and licensed operators are to be used. Metal Products should be stored in an environmentally-friendly area away from airborne contaminants such as acid and salt sprays.
SAFETY
We recommend protective clothing, (especially gloves) be worn when handling metal products (AS 2161-Occupational Protective Gloves) and that they should be checked regularly for damage. People with sensitive skin conditions should seek medical advice before prolonged handling of metal products; hands should be washed before eating and for personal hygiene. Non-fogging goggles (AS/NZS 1336) should be worn when cutting metal sections.
SITE TRAINING
It is the responsibility of the contractor to ensure his employees are trained in onsite O.H.A.S procedures as these may vary from site to site.
FLAMMABILITY
Non-flammable.
 |
 |
 - Download Aluloc Technical Manual |