Ceilings and Walls
Click through to Luna & Valk
Architectural Specifications
General
The contractors responsibility is to supply all necessary material, labour and equipment for the installation of the Aluloc aluminium ceiling system, as indicated on the architectural drawings.
Material
The Aluloc aluminium ceiling system shall be as manufactured by Luna And Valk Group Pty Ltd in a finish as required, either standard powdercoat satin (app 20% gloss) white, mill finish or natural anodise. All material shall meet the requirements of Australian Standard AS2785 - 1985 - suspended ceilings - design installation.
Grid Module
The grid module shall be either 600 x 600, 1200 x 400, 1200 x 600 or 1350 x 450 or as specified.
Perimeter Detail
Either one of three perimeter wall angle (refer product profiles, page 9) profiles can be used with any of the Aluloc aluminium ceiling systems.
Where exposed members of the grid come into contact with the wall angle, Mark 1, it is advisable (for seismic purposes) to use the universal bracket (# UBA), to ensure the grid and the wall trim provide a flush finish.
Where exposed members of the grid come into contact with the lipped wall angle, Mark 2, these members must be cut in or notched onto the lip of the wall angle protruding leg.